New Clamp Sensor

8115

AC/DC Clamp Sensor

• Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test. • Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.

Flicker Sensor

8325F

• Can measure Flicker in combination with KEW6310.

Voltage Sensor

8309

• Floating voltage can be measured.

Flexible Clamp Sensor

8129

• Flexible for various test fields • Can measure AC current up to 3000A • Flexible and light weight by the air core coil used at the sensor part • Measurable conductor size: max Φ150mm • Designed to meet the international safety standard IEC 61010-1 CAT.III 600V

Load current clamp sensors

8121

• Φ24mm

8122

• Φ40mm

8123

• Φ55mm

Leakage & Load current clamp sensors

8146

• Φ24mm

8147

• Φ40mm

8148

• Φ68mm

Load current clamp sensors

8128

• Φ24mm

8127

• Φ24mm

8126

• Φ40mm

8125

• Φ40mm

8124

• Φ68mm

Leakage current clamp sensors

8141

• Ø24mm

8142

• Ø40mm

8143

• Ø68mm

Clamp Adaptors

8006

• AC Clamp Adaptor • Model 8006 is designed to measure AC current up to1500A. • It can accommodate up to 60mm-dia conductor or 50mm by 75mm bus-bar.

8112

• AC Clamp Adaptor • Model 8112 clamp adaptor is designed to be an AC current/voltage conversion probe capable of measuring AC current from 0.1mA to 120A in conjunction with digital multimeters. Simple to operate, the unit has range switch position at 200mA,2A and 20A. It also features safety design throughout with no exposed metal parts.

8112BNC

• AC Clamp Adaptor • Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform on oscilloscope. Refer to a diagram shown at left for application. Specifications are same as those for Model 8112.

8113

• AC/DC Clamp Adaptor • Model 8113 is a clamp-on AC/DC current/voltage converter that permits AC/DC current measurements from 1mA to 200A in conjunction with a voltmeter having 0.1mV resolution.

Multi-Trans

8008

• Clamp your instrument around the pick-up coil of the multi-tran.